63
AUDIO setup menu
1.
Touch the
Setup
Setup
button on the touch screen menu and
then touch the
button.
2.
Touch the
button.
✔
The “Audio Effect Control” AUDIO submenu is displayed.
3.
Activate “DownMIX” (tow-zone mode) by touching it.
EXIT
EXIT
NEXT
NEXT
TREBLE
TREBLE
BALANCE
BALANCE
FADER
FADER
+0
+0
BASS
BASS
+0
+0
+0
+0
+0
+0
Audio Effect Control
Audio Effect Control
DownMIX
DownMIX
OFF
Stereo
Stereo
Stereo
Lt/Rt
The following settings are possible:
OFF: Keep the surround signal, i.e. no downmix
Stereo: Convert surround signal to stereo signal
Lt/Rt: Mix surround signal for rear speakers into the signal for
the front speakers
4.
Touch the desired setting.
5.
Touch the
EXIT
EXIT
button twice to exit the menu.
Downmix function (Chicago IVDM-7003)
The downmix function on the remote control is used to control
the downmix mode for the loudspeaker/preamp outputs. If the
downmix mode is activated using the
DOWNMIX
button on the
remote control, this will have the same effect as deactivating
(“NONE” or “NO” setting) the centre loudspeaker and subwoofer
in the audio setup’s “Speaker Setup” submenu.
Since the Chicago IVDM-7003 is equipped with a second digital
signal processor (DSP), the downmix function is always activat-
ed for the audio outputs of VIDEO 1 OUT and VIDEO 2 OUT.
Irrespective of this, the downmix function for the loudspeaker and
preamp outputs can be set by activating/deactivating the centre
loudspeaker and subwoofer. As a result, the “DownMIX” menu
item in the audio setup’s “Audio Effect Control” submenu is not
applicable and will not be displayed.
1.
Touch the
Setup
Setup
button on the touch screen menu and
then touch the
button.
2.
Touch the
button.
✔
The “Audio Effect Control” AUDIO submenu is displayed.
3.
Activate “DownMIX” (tow-zone mode) by touching it.
BA IVDM-7003 Teil 3 GB
03.02.2006, 8:34 Uhr
63
