31
Radio mode
Storing stations manually
18 memory locations are available in the FM waveband (6 on
each memory bank) and 6 memory locations in the AM wave-
band.
1.
Select the memory bank FM1, FM2, FM3 or the waveband
MW.
2.
Tune into the desired station.
3.
On the monitor: Touch the button of the station list for ap-
prox. 2 seconds where you want to store the tuned station.
On the device: Hold the station button (
1
to
6
) of the mem-
ory location pressed for approx. 2 seconds where you
want to store the tuned station.
✔
If the station is stored, the frequency or the station name is
displayed next to the selected number in the station list.
Any existing entry is overwritten.
Automatically storing stations
You can automatically store the six FM stations offering the strong-
est reception in the region. These stations are stored on memory
bank FM3.
Note: Any stations that were previously stored in this
memory bank are replaced in the process.
1.
On the monitor: Touch the
BSM
BSM
button on the touch
screen menu.
On the device: Hold the
BND / BSM
button pressed for
longer than 2 seconds.
✔
The device changes to memory bank FM3, if necessary,
and automatic storing of stations starts.
✔
After the process is completed, each stored station is
played for approx. 3 seconds. The station name is also
stored if the RDS function is activated.
Note: For stations with changing RDS displays, it is
possible that currently transmitted commercials or
other information is stored instead of the station name.
Calling up stored stations
1.
Select the memory bank or waveband.
2.
On the monitor: Touch the memory location of the desired
station in the station list.
On the device or on the remote control: Select the desired
memory location by using the station buttons
1
to
6
.
✔
The desired station is playing.
BA IVDM-7003 Teil 1 GB
03.02.2006, 8:32 Uhr
31
