Installing the Receiver in a Japanese Car
This receiver is designed for easy installation in most popular Japanese cars that have
bracket) mounting system. If you have questions, ask your Blaupunkt dealer.
2.
3.
4.
5.
Remove the vehicle’s “bezel” trim piece and the remove the existing radio.
Unscrew the bolts on each side of the receiver to remove the trim ring. Save the trim ring in case
you ever want to install the receiver in another vehicle.
Use the vehicle’s own mounting hardware to attach the unit.
With the detachable face removed, reinstall the vehicle’s bezel.
Only after the bezel in reinstalled, attach the face.
max.
NISSAN
max.
TOYOTA
max.
max.
MAINTENANCE
Removing the Receiver
Insert the “release handles” into the holes in the panel on the left and right of the receiver and push
them in until you hear a distinct snap, which indicates the side springs are unlocked. Pull the unit
out using both handles. (See Fig. 3) Note: Handles that have snapped into place can only be
removed after you have pulled the receiver out of the complement. Remember where you store the
“release handles”.
Fig. 3
Fuse Replacement
When replacing the fuse, be sure to use one with the correct amperage, which will be stated on the
fuse case. Never use a fuse that has a stated amperage exceeding the one supplied for this
receiver as this could cause malfunction and serious damage to the receiver.
GB6
