Setting the TIMER
Using this unit it is possible to conveniently
switch on any two radio stations you select
at any time you select. The radio stations
can be selected independently of the
currently active operating mode.
Proceed as follows:
Select the radio station of your choice.
Press DSC.
Press
to select TIMER 1.
Press
to turn the TIMER on. (Press
to turn the TIMER off.).
Press
again to select time display.
The minutes will flash.
Press
A
v to set the minutes.
Press
to activate the hours.
Press v to set the hours.
Press DSC to store your entry. You
have now set TIMER 1.
If you would like to set TIMER 2 as well,
repeat the steps as described above.
Note
The timers can be turned on and off while
any audio source is in use.
Cassette deck operation-
Cassette playback
Reversing the tape
Insert the tape into the slot with the open
To change the tape direction during cassette
side showing to the right.
playback:
The cassette playback will start. If a tape is
l
Press
simultaneously.
already inserted, press SRC to select the
Tke display shows
for
tape deck mode.
or “TAPE2 will
the selected tape side.
appear. The tape will be played in the
direction previously selected.
Cassette eject
Press to eject the cassette. The cassette
buttons will automatically retract.
Fast winding
Press the FF or FR button to fast forward or
rewind the tape during cassette operation:
“FORWARD” or “REWIND” will light up in
the display.
When the end of the tape is reached with
fast forward, the tape direction will change
and the other side of the tape will played.
With “Radio Monitor ON” during fast winding
you can listen to the radio program you
selected previously. It is possible to change
the Radio Monitor on/off setting in the DSC
mode. (Refer to “DSC programming RM”.)
13
