18
Remove the filter house door.
Loosen the nut+washer (2).
Remove the locking bar (1).
The filter bracket will now be tilted downwards so the
filters can be taken out easily.
Slide out the filter (3) and put it in a sturdy plastic bag.
Close the bags properly.
When mounting new filter cartridges pay attention that their gasket at the upper side lies firm at the sheet
steel of the filter chamber. A tilt of the filter cartridge results in leakage and the suction of contaminants in the
clean parts and consequently the machine blows dirt backwards in the outer air.
When a filter was damaged, has leaked or was mounted incorrect, it has to be replaced. The compartment
above the filters, the connecting air hoses and the silencer also have to be cleaned thoroughly.
If the silencer blows out dust, stop the machine immediately!
This means probably that a filter is damaged or not fitted properly inside the filter chamber.
Check the filters and replace if necessary.
Continuing work with a broken/leaking filter can cause serious damage to the machine and is a
health hazard!
1: Locking bar
2: Nut + washer
3: Filter
