Operating Instructions Manual BMG-2500 MULTI GRINDER
5
JANUARY 2005
© International Surface Preparation Group, Inc.
4.4
DO PROTECT YOUR EYES.
Observe all applicable local, state and federal safety regulations.
Wear OSHA-approved safety glasses when operating this machine.
4.5
DO NOT OPERATE OR MAINTAIN WITHOUT PROPER RESPIRATORY PROTECTION.
Follow OSHA approved respiratory protection standards when operating this machine in a dry
operation with a dust collector to avoid possible airborne contaminants. Grinding and cutting
concrete produces dust that may generate airborne respirable crystalline silica which if can lead
to silicosis and death. Observe all applicable local, state and Federal safety regulations that
pertain to the equipment, the products being operated and the substances being removed from
the surface.
4.6
DO NOTDO NOT USE IN DRY OPERATION WITHOUT AN APPROVED DUST COLLECTOR
SYSTEM. This machine is designed and ntended for use with an approved dust collection
system as recommended on page 3 in this manual. The dust collector system is intended to
reduce or eliminate the escape of potentially hazardous or nuisance dust into the environment.
4.7
DO PROTECT YOUR HEARING.
Observe all applicable local, state and federal safety
regulations. Wear OSHA-approved hearing protection when operating this machine.
4.8
DO AVOID A DANGEROUS ENVIRONMENT.
Before starting the machine, survey the work area
for hidden obstructions and/or uneven cracks or joints. Do not expose machine to rain. Do not
use machine in standing water conditions. Keep work area well lit. Do not allow machine to cross
over the edge of the concrete slab or work surface.
4.9
DO KEEP WORK AREA CLEAN.
Cluttered work areas and debris buildup on floors creates an
unsafe work environment.
4.10
DO AVOID FLAMMABLE LIQUIDS OR GASES.
Power tools produce sparks during operation
and when starting or stopping electric motors. Never use machinery in dangerous sites containing
materials that are combustible or explosive.
4.11
DO GUARD AGAINST ELECTRIC SHOCK.
Before starting machine, insure that an assured
ground circuit is made with the green ground wire in the power cord connected to the ground
circuit at the power source.
4.12 DO
KEEP
CHILDREN AND VISITORS AWAY.
Do not let children or visitors contact machine or
extension cord. Keep children and visitors away from the work area at all times.
4.13
DO STORE IDLE MACHINE.
When not in use, machine should be stored in a dry and secure
location. Keep machine out of the reach of children or unqualified operators.
4.14
DO NOT FORCE MACHINE.
The machine will do a better and safer job when operated at the
rate for which it was designed.
4.15
DO USE CORRECT MACHINE.
Do not force the machine or attachments to do the job of a larger
machine. Do not use the machine for a purpose not intended.
4.16
DO OBTAIN MATERIAL SAFETY DATA SHEET (MSDS) FOR ALL MATERIALS.
Refer to the
MSDS of all substances in and around the machine and follow the appropriate safety guidelines
associated with the use/exposure of the substance.
4.17
DO NOT ABUSE POWER CORD.
Never pull machine by power cord, run over cord with
machine or forklift, or pull on cord by extending machine distance from power source too far.
