Operating Instructions Manual BMG-2500 MULTI GRINDER
30
JANUARY 2005
© International Surface Preparation Group, Inc.
Right Hand Carbide Holder
Left Hand Carbide Holder
Bottom of photo is “front” of machine
Figure 17
– Photo of bottom of BMG-2500 illustrating proper rotation, proper Carbide Holder,
Carbide Holder Block and Cutter placement.
10.7.2
Cutter Placement and Adjustment.
Carbide placement will vary from application to application. In
dryer, more brittlle removal applications carbides located in the 90 degree locations may be most
effective. In sticker, softer removal schenarios the operator may feel relocation of the holder
blocks to the 67.5 or 45 degree locations will have a peeling effect allowing better production.
This will also help eject swarf away from the cutting surface.
CUTTER LOCATION
A) 90 DEGREE LOCATION
B) 67.5 DEGREE LOCATION
C) 45 DEGREE LOCATION
