Blastrac 500 E Global, Operating Instructions Manual

Page: 61 / 108

500 E Global Operating Instructions
Maintenance
3
7.2 Maintenance and inspection list
Operating hours/
time period Inspection points, maintenance
instructions
12 h after repairing
Check the efficiency of all safety devices.
Check all accessible screw connections for
tight seat.
every 3 h Check whether there is any foreign matter in
the hopper, the shot valve housing or in the
blast wheel unit.
Check blast wheel, liners and fasteners for
wear and damage.
Check the seal systems for wear.
Check the electric connections for sediments
of dirt or foreign bodies.
Check the electric motors for dirt and other
contaminants.
daily and prior to
starting work Check the hose connections for tightness and
fixed seat.
Check the hose to the filter for damages.
Make sure that the dust container of the filter
is emptied. Check blast wheel, liners and
fasteners for wear and damage.
Check the separator parts for wear and
defects. Remove foreign bodies and dust
deposits.
Check the level of abrasive in the storage
hopper. Top up if necessary.
Check all connections of the electric cables
for fixed seat, and check the cables for
damage.
Check the electric motors and connections
for dirt and other contaminants.
annually
Full overhaul and cleaning of the complete
machine.