2-45D
Operating Instructions
Transport
3
Check the surface to be treated for loose parts (stones, screws, etc.).
The surface must be swept if necessary. Make sure that the machine
can travel over all inequalities on the surface. Small inequalities like
weld seams or floor joints are no barriers for the machine.
4.4 Operation
The machine is operated in accordance with the instructions given in
Chapter 5 ”Initial operation“.
Whenever the machine is not used for blast cleaning, the abrasive
valves must always be closed!
Please note that the illustrations are simplified.
4.5 Unit specifications
The main dimensions and unit specifications of the machine when
assembled are shown in Chapter 1 "Technical data“.
4.3 Operation conditions
