2-45D
Operating Instructions
Safety instructions
7
2.4 Special work within the scope of use of the equipment and
maintenance activities as well as repairs during operation
Mechanical servicing work:
Put the machine in the
Safety off position
as described in chapter
2.5 for any servicing work on the machine in order to prevent the
machine from being
switched on
accidentally
.
Please follow any special
safety instructions
in the various chapters
on servicing the machine.
See chapter 7.1 - 7.9.
Adjustment, servicing and inspection work and time limits
specified in these Operating Instructions as well as any information
on the replacement of parts and equipment must be
undertaken
and/or complied with
!
These activities may only be undertaken by
qualified personnel
.
Do not use any
aggressive
cleaning materials!
Use lint-free
cleaning cloths
!
Always tighten any screw connections that are undone during
servicing and maintenance work!
If
safety devices
need to be
dismantled
during setting up, servicing
and repairs, these
safety devices
must be
reinstalled
and inspected
immediately after completion of the servicing and repair work.
Make sure that process materials and replaced parts are
disposed of safely and in an environmentally-friendly manner!
Hydraulic servicing work:
Make sure that hydraulic components used for replacement purposes
comply with the original parts and are correctly adjusted if necessary.
For safety notes see 2.7 Hydraulic and electrical engineering
regulations.
