2-45D
Operating Instructions
General
7
3.8 Separator, magnetic drum and hopper
The abrasive separator is mounted to the end of the recovery duct. It
separates the abrasive from contaminants and feeds the cleaned
abrasive onto the magnetic drum. This magnetic drum functions as a
second separator for bigger particles and feeds the cleaned abrasive
back to the abrasive storage hopper.
Two wire meshes are fitted to prevent any coarse contaminants from
getting into the blast wheel. In order to clean the wire mesh drawers,
the drawers can be removed from the sides.
Fig. 3.4
1
Separator cover
2
Magnetic drum
3
Deflector
4
Separator
5
Magnetic drum motor
6
Belt cover
7
Hopper (part of separator)
8
Separator tray
9
Hose connector
