2-45TDC Operating
Instructions
Operation
3
6.4 Switching-off the machine
Please contact
Blastrac
for a complete manual describing all controls
and settings.
Make sure that all turning dust collector and blower parts have
come to standstill and that all hydraulic power devices have been
shut down complete before any inspection or maintenance works
are started.
6.5 Troubleshooting
Irrespective of the following information, the local safety regulations
are valid in any case for the operation of the dust collector.
First put the truck dust collector to its
Safety off position
. Afterwards
start searching for the fault.
6.6 Safety
shutdown
The dust collector has to be into its
“Safety off position”
before
starting repair works. See Chapter 2 “Safety instructions”.
6.7 Restarting after a fault
See Chapter 5 “Initial operation“.
All persons in the proximity of the dust collector must wear ear
protectors, safety glasses with lateral protection as well as
safety shoes. The operator is obliged to wear close-fitting
protective clothing.
