BLANKOM IRD-6100 HD IRD User Manual
BLANKOM_IRD-6100_User_Manual_RR-V1.1-03-2018.doc
- 41 -
General notes about Streams:
Multicast streams:
Multicast Address Ranges:
We recommend, that the addressing of your Multicast streams should be in conjunction with this listings to
avoid conflicts with other network equipment or protocols.
https://www.iana.org/assignments/multicast-addresses/multicast-addresses.xhtml
One small part from this:
IPv4 Multicast Address Space Registry
Last Updated
2018-01-05
Expert(s)
Stig Venaas
Note
Host Extensions for IP Multicasting [
RFC1112
] specifies the extensions required of a host
implementation of the Internet Protocol (IP) to support multicasting. The multicast
addresses are in the range 224.0.0.0 through 239.255.255.255. Address assignments are
listed below.
The range of addresses between 224.0.0.0 and 224.0.0.255, inclusive, is reserved for the
use of routing protocols and other low-level topology discovery or maintenance protocols,
such as gateway discovery and group membership reporting. Multicast routers should
not forward any multicast datagram with destination addresses in this range, regardless of
its TTL.
Available Formats
XML
HTML
Plain text
Registries included below
Local Network Control Block (224.0.0.0 - 224.0.0.255 (224.0.0/24))
Internetwork Control Block (224.0.1.0 - 224.0.1.255 (224.0.1/24))
AD-HOC Block I (224.0.2.0 - 224.0.255.255)
RESERVED (224.1.0.0-224.1.255.255 (224.1/16))
SDP/SAP Block (224.2.0.0-224.2.255.255 (224.2/16))
AD-HOC Block II (224.3.0.0-224.4.255.255 (224.3/16, 224.4/16))
RESERVED (224.5.0.0-224.251.255.255 (251 /16s))
DIS Transient Groups 224.252.0.0-224.255.255.255 (224.252/14))
RESERVED (225.0.0.0-231.255.255.255 (7 /8s))
Source-Specific Multicast Block (232.0.0.0-232.255.255.255 (232/8))
GLOP Block
