BLANKOM IRD-6100 HD IRD User Manual
BLANKOM_IRD-6100_User_Manual_RR-V1.1-03-2018.doc
- 4 -
Chapter 1 Product Outline
Outline
This BLANKOM IRD-6100 HD IRD receives Transponder RF-signals from the installed tuner
(DVB-S/S2 /C/ T/T2 /ISDB-T/ATSC optional), ASI and IP-Input sources and multiplexed signals out to
ASI, IP as well as various video/audio interface outputs at the same time after multiplexing and
de-encryption with a CA module. It is featured with a LCD video monitor on the front panel. Its
video/audio outputs support professional HD/SD-SDI, YPbPr, HDMI, XLR balanced audio, and S/PDIF
digital audio as well as CVBS. With the CAM slot (CI/CI+) support, The BLANKOM IRD-6100 HD IRD
can support one channel (Tuner, ASI or IP) de-scrambling and output a transparent signal. The user
can operate the device with the front panel keypad or by Web-Interface based. Additional, the user
can choose to use an optional ASI output interface which can pass through the Frontend Input TS
directly. Optional available with modules for DVB-T/2 SFN network 10MHz Sync / MIP.
Statement:
Text and pictures herein are subject to changes w/o notifications.
The user manual will be updated in real time without special notice.
This user manual is provided only as a reference guide for technicians as examples.
Default Values
The factory default administrator account:
admin
The factory-default user password:
admin
The factory default IP address:
192.168.0.136 NM 255.255.255 GW 192.168.0.1
Set the administrator’s computer IP as: 192.168.0.* to avoid IP conflicting with the units own IP address
192.168.0.136.
192.168.0.*: use an IP setting “*” in the number range 2-254 and except the units default IP.
Remark: .0 is often the network router, .1 often the Gateway of the used router, .255 might be a network
broadcasting address.
Please change these account settings according to your local policy and network. -> Do not forget to safe and
backup the configuration by Web-Interface and its related system-sub-menu.
