BLANKOM IRD-6100 HD IRD User Manual
BLANKOM_IRD-6100_User_Manual_RR-V1.1-03-2018.doc
- 14 -
Main Interface
After switching on the IRD and pressing the “LOCK” key on the front panel to enter to the main
menu, the LCD will display the following pages:
General Setting
User could do all the settings according to the 8 directions displayed on the LCD.
Input Setting
User can press “Enter” key to enter into the menu of the input setting.
Tuner In
(taking DVB-S2 HD IRD module as an example)
The menu from 1.1 to 1.3 represents the tuner, ASI and IP input ports of the IRD. User can multiplex
the input programs from any port to output any program or all the programs at the same time. By
pressing the “Enter” key, the device will take a while to analyze the input TS or signal and then
display the program list at the submenu, say, 1.1.1-1.1.6
By pressing the “Enter” key to enter the submenu of 1.1.1
1. Input Setting
2. Output Setting
3. Decoder Setting
4. Descramble Set
5. Network Setting
6. Saving Config
7. Loading Config
8. Version
1.1 Tuner (DVB-S2)
1.2 ASI
1.3 IP
1.1.1 Prog Parse
1.1.2 Sat freq Set
1.1.3 LNB freq Set
1.1.4 Symbol rate
1.1.5 LNB Voltage
1.1.6 22KHZ Switch
1.1.1 Prog Parse
Prog:00 Mux:00
