27
A-QAMOS-4CI
Part N
o
: 5102.81
SAT-TV Transmodulator
DVB-S/ -S2 (8x QPSK/ 8PSK)
→
4x CI
→
DVB-C (8x QAM)
A
LINE
7.3.12 Menu ”LCN”
The allocation of a logical channel number (LCN) is a service that allocates a serial number to each TV program in all the channels,
which are enabled for this service. If the set-top box supports this service at the subscriber, the TV programs are offered in the order
established by program numbers.
To use this service, the LCN processing of all appropriate channels must be turned on. Then you can set the program order. It should
be noted that the numbering is done separately for HD and SD programs. When you first load the LCN editor there in the left table
cell, all the transferred services of the channels are listed that were marked in the lower right table for LCN processing. TV channels
are already pre-selected, separated for HD and SD programs, all services are still provided with the number 0. You can now assign
the LCN for the selected program automatically by pressing the “OK“ button in the right box “automatic numbering“, starting with the
number registered there. The numbers can also be selected manually: individually by clicking the corresponding box in the left table,
or all programs of a type by pressing the “Enable all“ button. The numbering itself is performed again by pressing the “OK“ button. In
order to reverse the numbering for HD or SD programs, one selects the corresponding LCN type in the right table field and press the
“Reset all (LCN = 0)“.
7.3.13 Menu ”Program table”
The program table gives an overview of the channel allocation of the A-QAMOS-4CI. The overview begins with the output frequency
and output channel identifier for each transmission channel. Under them all TV and radio programs are listed, which are transmitted in
this channel. By clicking the “Save“ button, the program table can be saved as a text file on the connected PC.
