31
A-QAMOS-4CI
Part N
o
: 5102.81
SAT-TV Transmodulator
DVB-S/ -S2 (8x QPSK/ 8PSK)
→
4x CI
→
DVB-C (8x QAM)
A
LINE
After the successful completion of the installation of the playback tool, you can select video converter already in a file.
In the following, a video file is selected and clicked “Quell-Datei abspielen“. This will open the video player and returns the selected
file.
Using the button “Ziel-Datei“ the path and name for the file is to be created are defined. The file extension will be denominated in any
case *. ts and can not be changed. For a distinction between the individual films a unique name should be used, e.g.
Infofilm.WBG.SD.4:3.PID65535.ts
If an error was made when entering - as a numerical figure is outside the permitted range - or were required fields not filled in, the start
of transformation is blocked. Incorrectly filled fields are highlighted in red. The boundaries of the allowed values are displayed as a
tooltip when the mouse pointer rests over the input field a long period of time.
After that the setting of the desired output parameters for the conversion follows. A detailed overview of the range and standard infor-
mation found in the glossary of the program (see chapter 9.5). It should be stated only briefly that it is possible to create from SD
also HD content, however considering that image information is added. The quality is therefore not to be compared with original HD
content.
It should be noted that without configuring the path for post-processing is not possible to optimize the transport stream file, i.e. the
two check boxes “Null-Pakete komprimieren“ and “Vermeidung von Continue-Count-Fehlern“ remain inactive.
9.4 Error prevention
1. If you want to create HD video from SD material so it is to be reckoned with qualitative degradation because there data be added
that were not in the original.
2. Provider name, service name, and original network ID are system dependent and are used to allocate the net sites of the operator
and adjust its network.
3. To avoid serious disturbances in the network, the elementary stream ID should be unique throughout the network.
9.5 Glossary - parameter declaration [min. … max. range]
Provider-Name
[freely selectable]
(provider name)
Service-Name
[freely selectable]
(service name)
Original Network-Id
[0 … 65.536]
(original network ID)
Elementarstrom-Id
[256 … 8.191]
(elementary stream ID)
Service-Id
[0 … 65.536]
(service ID)
PMT Start-Pid
[4.096 … 8.191]
(PMT start PID)
Transportstrom Start-Pid
[0 … 65.536]
(transport stream start PID)
Auflösung
SD, HD 720, HD 1080
(resolution)
Seitenverhältnis
4:3, 16:9, 24:10
(aspect ratio)
Null-Pakete komprimieren
1
yes, no
(compress null packets)
Vermeidung von Continue-Count-Fehlern
2
yes, no
(avoid continue count errors)
1
This switch enables the compression of null packets in the transport stream. Thus, a significant reduction in file size is achieved especially for files that
have a big difference between video and transport stream bit rate. However, the resulting files are not compatible with conventional software programs.
These compressed files are used only by the A-QAMOS-4CI or compatible devices of BLANKOM company..
2
This switch activates a function which suppresses the conversion resulting from the continue count errors due to the different buffer models. It is stron-
gly recommended to enable this option in order to achieve optimal results.
