8
A-QAMOS-4CI
Part N
o
: 5102.81
SAT-TV Transmodulator
DVB-S/ -S2 (8x QPSK/ 8PSK)
→
4x CI
→
DVB-C (8x QAM)
A
LINE
You select the output channel in the selection box right before the transmitter or transponder selection is made. The selection begins
with channel S 21 and D 306 (306.00 MHz). But the channels of the entire frequency range of 45 ... 862 MHz can be chosen freely in
the selected channel spacing (see chapter 7.3.8). From the channel list on the left you can select by double click the desired program,
and thus the entire transponder (which contains this program), which is then transmitted in that output channel. After the selection all
channels in this package will be listed in the middle list box. In the upper part the television programs are listed and in the lower part
the radio programs. In the upper right list box status information will appear for the selected transponder. In the right list box below
there is the list of already selected transponder to the output channel in which they are to be transmitted.
In this way, now up to 8 transponders per A-QAMOS-4CI can be selected to be transferred. First, as the output channel the next hig-
her channel to the last selected program package is offered. But for each packet the output channel can be chosen freely in the total
frequency range. If an incorrect selection is made, it can be removed by double-clicking the unwanted selected transponder in the
right field .
