17
16
6.1 Getting Started
5) Satellite Channel Search
ᶀ
Auto Scan <Figure 6-1-9>
⊹
To select more than one satellite, press the
button when the selection bar is
positioned on the satellite.
⊺
Press
on the names of the satellites that you want to scan under ‘Satellite List’.
Press the EXIT button to close the ‘Satellite List’.
⊻
Press
/
and set the ‘Search Type’ and ‘Network Search’ parameters.
- Search Type
: Decide for which channels to search (All channels/ Free channels
only/ TV channels only).
- Network Search
: Set ON to find more transponders (frequencies) through a Network
Information Table (NIT) scan. That is, when the broadcaster is
sending a NIT through a given transponder, the receiver will also
scan for transponders listed in the NIT and not otherwise recognized.
(this can happen when a transponder is new)
⊼
Press
RED buttom
under ‘SCAN’ to scan the selected satellites. <Figure 6-1-10>
<Figure 6-1-9>
<Figure 6-1-10>
<Figure 6-1-7>
<Figure 6-1-8>
6.1 Getting Started
(When the DiSEqC Motor parameter is set as USALS)
- Move
: Move the dish position to west/east by pressing
/
buttons.
- Motor Control
: Control motor by press
button ot the remote.
⍜
Goto Reference
: Goto reference by pressing
button.
⍜
Set West Limit
: Edit & Save west limit by pressing
/
or
buttons.
⍜
Set East Limit
: Edit & Save east limit by pressing
/
or
buttons.
⍜
Enable Limit
: Enable the saved east and west limit.
⍜
Disable Limit
: Disable Limit by pressing
button.
⍜
Save
: Save the current Setting of USALS system.
- Sat Degree
: Displays the current defree of the selected satellite. Edit degree by
pressing
/
buttons and numeric buttons.
- Position Setting
: Select position setting by pressing
button.
⍜
Antenna Longitude
: Edit antenna longitude by pressing
/
buttons and numeric
buttons.
⍜
Antenna Latitude
: Edit antenna latitude by pressing
/
buttons and numeric
buttons
- Go To
: Save the current setting of USALS Systme.
