background image

57

56

Trouble Shooting

There may be various reasons for the abnormal operation of the unit. Therefore, if the unit
does not work properly, check it according to the procedures shown in the table below:

Problem

Possible causes

Remedy

LED on front panel 

AC power cord is not 

Make sure that power cord is

does not light.

connected.

connected properly into the 
power socket.
Make sure power switch is on.

No Picture or sound

The video/audio output of the

Make sure that video/audio

receiver with TV is connected.

cable is connected to the TV.

The aerial is not connected to

Make sure that the aerial is 

the receiver.

connected properly to the 
receiver.

Menu setting is not done 

Make sure that menu setting is 

properly.

done properly on each menu.
If you are not sure about 
proper menu setting, please 
contact your local dealer. 

Black-and-white

Your TV mode is different from 

Use TV of same mode.

screen

broadcasting mode.

Use the NITSC/PAL converter 
connected to the receiver and 
TV.

The remote 

Battery exhausted.

Change the batteries of remote

controller is not 

Remote controller is incorrectly

control.

working.

aimed.

Aim the remote control at the
Receiver correctly.

6.9 PVR

<Figure 6-9-14>

<Figure 6-9-15>

7) Time Shift

If you want to pause and resume live TV channel, press 

PAUSE

button. The default

time of Time-Shift is 30 min in your STB.<Figure 6-9-14>

If you want to resume live TV channel, press 

PLAY

button. <Figure 6-9-15>

͊

The trick-mode operations are provided. If you want to jump to live channel, please
press

.

8) Media File Playback

Press 

or PLAY button to display Media file list.

Press 

button to play the selected file.

6.9a Online Services

Blade Receivers have the incredible ability to reach out from your living room, and into the
outside world. Download channel data files directly to your receiver without having to scan
in and sort into favorites, stream your own video library direct from your own PC to your TV
or even a friends TV in another state or country using Blade Stream (get it from our website).
You can also get the WEATHER for your city, use MAPS to find your way, and even watch
videos from the world's largest online video streaming sites, as well as listen to thousands of
Internet Radio stations, all absolutely free of charge.

All this incredible content can be found by pressing MENU > SETTINGS:

BLADE ONLINE

ONLINE SERVICE

Download channel lists for around the world.

Get Maps, Weather, Tube Videos, Internet Radio, all free of charge.

For the very latest support, please visit our website: www.blademedia.tv

Summary of Contents for BM-7000s































Reviews: