NeuroMotive™ User’s Manual
LB-0336 Rev. 1.00
Page 5
Specifications
System Specifications
Model Name
NeuroMotive™
Power Requirements
120/240 VAC 60 Hz, 8.0 Amps maximum load, UPS backup power available for up
to 5 minutes.
Serviceable Fuses
5 x 20mm, 250V, 1.6A, Slow Blow
Compliance Standards
IEC 60601-1, IEC 60601-1-2, IEC 60601-2-26, CSA listed
Type of Protection
Class I (Amplifier Power Supply)
Degree of Protection
Type CF Applied Part (Amplifier and Patient Cable Assembly)
Mode of Operation
Continuous
Water Ingress Protection
Ordinary Equipment, not fluid resistant, IP20
Operating Environment
10˚C to 40˚C, 5 to 95% R.H.(non-condensing)
Storage Environment
-20˚C to 50˚C, 5 to 100% R.H.(non-condensing)
Camera Specifications
NeuroMotive™ currently supports the Firefly MV and OptiTrack V100:R2
1.
Firefly MV (B&W or Color)
Resolution
752x480 at 60 FPS • 320x240 at 112 FPS
Frame Rate
60 FPS, 112 FPS
N
OTE
:
T
HE SOFTWARE CURRENTLY SUPPORTS ONLY
640
X
480
AT
30
FPS.
Input/Output
USB 2.0
Synchronization
Software and External Trigger
Lens Mount
CS-Mount (5mm C-mount adapter included) • M12 microlense mount
Further information can be found at:
http://www.ptgrey.com/products/fireflymv/fireflymv_usb_firewire_cmos_camera.asp
2.
OptiTrack V100:R2
IR light
850nm from 26 LEDs
Resolution
640 X 480
Frame Rate
25 FPS, 50FPS, 100 FPS
Input/Output
USB 2.0
Synchronization
Software and External Trigger
Lens Mount
M12 lens mount
Further information can be found at:
http://www.naturalpoint.com/optitrack/products/v100-r2/specs.html