NeuroMotive™ User’s Manual
LB-0336 Rev. 1.00
Page 50
NeuroMotive™ will default to for finding video files to playback (Playback directory) and where to save
NeuroMotive™ settings (Experiment directory).
Playback a Standalone Video
Start NeuroMotive™.
Go to
File->Open Video
.
Type in the file name in the field or navigate to the video file in the dialog box that appears and click
Open
.
Click on
Play
.
Record a Video with a Neural Recording
A video file can be recorded in sync with neural data recorded using Central Software Suite. Before starting to
record with NeutoMotive®, Central must be running on a Host PC, connected to an NSP or CerePlex™ Direct and
the File application should be open and setup properly, ready to record.
Start NeuroMotive™ and make sure the video camera is connected properly and selected.
On the Host PC, open the File application in Central (Refer to the Cerebus™ manual).
Make sure File Specification is 2.3 or higher and the File application is synchronized with NeuroMotive™ (in
the File application go to
View->Options->Sync with NeuroMotive™ (if present)
, for further details refer to
the Cerebus™ manual).
A NeuroMotive™ indicator should appear on File application dialog.
Figure 44 - File Application Connected to NeuroMotive™
In order to use NPlayServer, be sure to record continuous data.
Start neural recording through the File application.
Video recording will start automatically on the NeuroMotive™ PC. Note that NeuroMotive™ will duplicate
the filename specified in the File application. Additionally, if the filename chosen is already being used by
another video file in the recording directory then NeuroMotive™ will automatically append an incrementing
counter to the filename to create a unique filename.
During recording of files, NeuroMotive™ will continue recording when Central is paused.