Blackmagicdesign Blackmagic MultiView 4, Installation And Operation Manual

Page: 220 / 343

Solo Input
（单画面输入）
当
Blackmagic MultiView 16
的前面板上的“
SOLO
”按钮启用时， “
Solo Input
”按钮可以决定哪路
输入将全屏显示。点击
Videohub Control
的
Destination
面板中的“
Solo Input
”按钮，再点击
Sources
面板中的一个输入按钮即可。
Audio Input
（音频输入）
当使用
Blackmagic MultiView 16
及
Blackmagic MultiView 4
时，您可以使用
Videohub Control
软件
中的“
Audio Input
” （音频输入）按钮来决定哪路
SDI
输入的音频将被指派到多画面分割输出上。
点击
Videohub Control
的
Destination
面板中的“
Audio Input
”按钮，再点击
Sources
面板中的一个
输入按钮就可以立即将该输入的音频指派到该多画面分割输出了。
“
Solo Input
” （单画面输入）和“
Audio Input
” （音频输
入）按钮可让您通过
Videohub Control
更改这些设置。
Developer Information
Blackmagic Videohub Ethernet Protocol v2.3
Summary
Your Blackmagic MultiView is compatible with the Blackmagic Videohub Ethernet Protocol. It is
text based and is accessed by connecting to your Blackmagic MultiView
’
s IP address and
TCP port 9990.
The multi view sends information in blocks which each have an identifying header in all caps,
followed by a full colon. A block spans multiple lines and is terminated by a blank line. Each line
in the protocol is terminated by a newline character.
Lines sent to the Blackmagic MultiView 16 can be terminated with line feed, carriage
return or both.
Upon connection, the multi view sends a complete dump of the state of the device. After the
initial status dump, status updates are sent every time the multi view status changes.
To be resilient to future protocol changes, clients should ignore blocks they do not recognize,
up to the trailing blank line. Within existing blocks, clients should ignore lines they do not
recognize.
备注
两款
MultiView
型号均可通过以太网进行控制，但是大多数功能都与
Blackmagic MultiView 16
相关。使用
Blackmagic MultiView 4
机型时，您可以更改
Multi View
的音频源。
220 220 Developer Information