Blackmagicdesign Blackmagic MultiView 4, Installation And Operation Manual

Page: 334 / 343

Solo Input
Assegna al pulsante "Solo Input" la fonte che desideri visualizzare a schermo intero. Per
abilitare questa funzione, premi il pulsante SOLO sul pannello di controllo frontale di Blackmagic
MultiView 16. Clicca sul pulsante "Solo Input" nella finestra "Destinations" di Videohub Software
Control, poi premi il pulsante corrispondente alla fonte desiderata nella finestra "Sources".
Audio Input
Sia Blackmagic MultiView 16 che Blackmagic MultiView 4 consentono di assegnare al pulsante
"Audio input" la fonte audio SDI che desideri riprodurre. Clicca sul pulsante "Audio input" nella
finestra "Destinations" di Videohub Software Control, poi premi il pulsante corrispondente alla
fonte audio desiderato nella finestra "Sources" per instradarlo verso l'uscita multiview.
I pulsanti "Solo input" e "Audio input" di Videohub Software Control
consentono rispettivamente di visualizzare una fonte a schermo
intero e di selezionare la fonte audio che desideri riprodurre.
Developer Information
Blackmagic Videohub Ethernet Protocol v2.3
Summary
Your Blackmagic MultiView is compatible with the Blackmagic Videohub Ethernet Protocol. It is
text based and is accessed by connecting to your Blackmagic MultiView’s IP address and
TCP port 9990.
The multi view sends information in blocks which each have an identifying header in all caps,
followed by a full colon. A block spans multiple lines and is terminated by a blank line. Each line
in the protocol is terminated by a newline character.
Lines sent to the Blackmagic MultiView 16 can be terminated with line feed, carriage
return or both.
Upon connection, the multi view sends a complete dump of the state of the device. After the
initial status dump, status updates are sent every time the multi view status changes.
To be resilient to future protocol changes, clients should ignore blocks they do not recognize,
up to the trailing blank line. Within existing blocks, clients should ignore lines they do not
recognize.
NOTE Controlling your MultiView via Ethernet is available on both models,
however, most features are relevant to Blackmagic MultiView 16. On Blackmagic
MultiView 4, you can change the source for the Multi View audio.
334 334 Developer Information