manualshive.com logo in svg

BLACKHAWK! LITE 125 2.0, Engine Manual And Maintenance Manual

Share
Download
BLACKHAWK! LITE 125 2.0 Engine Manual And Maintenance Manual Download Page 5

 

Engine Manual Talon 190 and Lite 125 Ver .99b 

 

4/08/2019 

pg. 5 
 

Remove the Carburetor from the Talon 190 Engine: ............................................................................ 43

 

Re-Install the Carburetor on the Engine: .......................................................................................... 45

 

Talon 190 Carburetor Rebuild Kit and the diaphragms used ................................................................ 46

 

Talon 190 Carburetor Diaphragm Replacement: .............................................................................. 46

 

Remove the Carburetor from the Lite 125 ............................................................................................ 48

 

Re-Install the Carburetor on the Engine: .......................................................................................... 50

 

Lite 125 Carburetor Rebuild Kit and the diaphragms used .................................................................. 51

 

Lite 125 Carburetor Diaphragm Replacement: ................................................................................. 52

 

Carburetor Complete Rebuild Video................................................................................................. 53

 

Fuel Line Section .................................................................................................................................. 54

 

Fuel Line Replacement Instructions: ................................................................................................ 54

 

Exhaust Port Couplings Section............................................................................................................ 59

 

Warranty .................................................................................................................................................... 60

 

Duration of Warranty ............................................................................................................................ 60

 

The Following Situations Void the BlackHawk Warranty .................................................................... 60

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for LITE 125 2.0





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands