www.miniraq.com
PAGE 3
2 Post Rack mounting option (Hole Pattern A)
Using supplied #12-24 screws align and
insert 1 screw. Do not fully tight screw but
engaged enough to hold up back panel.
Using integrated level, adjust panel and
add second screw to opposite post.
Add remaining 8 screws
and then tighten all.
Next go to bracket
installation details (pg 7).
Begin installing #12-24 Screws
at the top using the integrated
Level to locate proper mounting
pattern. 10 screws recommended
for full payload rating of system.
Secure both top and bottom of
2 Post Relay Rack before loading
MiniRaQ
(TM)
Close up detail of
2-Post Mounting option
FIGURE 3