www.miniraq.com
PAGE 2
MiniRaQ
Installation Instructions
(TM)
Detailed
First confirm that the main back panel of the MiniRaQ
will be mounted onto a
recommended surface and be sure proper hardware is available to proceed.
Hardware is supplied for both 2 Post rack (kit contains 10 #12-24 relay rack screws)
and wooden framing studs 16” on center (kit contains 10 #10 x 2” Stainless Steel screws).
If installing into concrete or approved plywood electrical panel be sure to have
appropriate 1/4” hexhead concrete screws**, lag bolt inserts* or toggle bolts* before
continuing with installation.
10 fasteners are recommended for full rated load
**10 fasteners are recommended for full rated load
(TM)
*
2 Post Rack mounting option
(Hole Pattern A)......................................................................Page 3
Mounting to Cinder Block or Approved
Hollow Wall (Hole Pattern C)...............................................Page 5
Mounting to Concrete Wall with
Compression Lags (Hole Pattern C)....................................Page 6
Mounting to Concrete Wall with TAPCON® bolts
(Hole Pattern C)......................................................................Page 6
..........................................Page 7
Specifications and Warranty Information........................Page 8
Bracket Installation Details
Mounting into 16 inches on center
solid wood wall studs (Hole Pattern B)..............................Page 4
Note
!
A
C
B
Mounting main back panel for MiniRaQ
(TM)
Close up detail of
Mounting hole patterns
for different hardware options
Available to install the
MiniRaQ
System
(TM)
FIGURE 2