11
This section will instruct you on how to
program your buttons as well as other
options, such as the default volume
levels.
The VideoClip can associate two buttons
as volume control, leaving the other 6 for
content. Our test content, which is pre-
loaded has a configuration file called
Autoplay.txt
Note: The naming of this file does not
determine whether your VideoClip has
AutoPlay functionality. The name is the
same for both Standard and AutoPlay
units.
To configure your buttons, open the
Autoplay.txt file. The command
"irmode=1" must be defined at the
beginning of the file.
The blue box above shows the default
button assignments. For each entry, the
number on the left defines the button
(01 - 08) and the number on the right
defines the folder it is associated with. In
the above example, buttons 01 - 08 are
associated with folders 01 - 08,
respectively. Pressing a button will play
the files inside its associated folder.
Below shows an example volume
configuration:
The first box defines the default volume
(0-31). This will be the volume played
upon looping.
The second box shows the volume button
assignment.
VOL_PLUS and VOL_MINUS are extra
commands which, in the example above
are assigned to buttons 07 and 08 to
control the volume.
Summary of Contents for VideoClip HD8
Page 1: ...1 V1 ...
Page 16: ...16 ...
