13
The VideoClip can be programmed to
play content upon PIR activation.
Simply connect the PIR to the I/O input. A
looping display can be utilised in PIR
mode just as in the previous modes, this
means the VideoClip can display video or
images in a looping fashion until the PIR
activates content stored in the folder.
The above content will loop through the 3
images until PIR activation. Once
triggered it will play the file located in
folder ‘01’
, before returning to the looping
3 images.
To configure PIR mode, open the
AutoPlay.txt file. The command
"sensor_mode=1" must be defined at the
beginning of the file.
The above text file assigns the PIR to play
content in folder
‘01’. The default volume
(0-31) is set to 15.
Note: The PIR is sold separately and must
be connected via the I/O port.
Once connected, the VideoClip is set to
uninterruptible playback which means
any files located in folder ‘01’ will be
played through in their entirety before PIR
can be activated again.
Summary of Contents for VideoClip HD8
Page 1: ...1 V1 ...
Page 16: ...16 ...
