15
Function
Command
Example Feedback
Disable the HDMI® digital
audio of output [x], where
[x]=1~5, representing outputs
1~4 and where 5 is all outputs.
DigitAudioOFF[x]
DigitAudio OFF with Output 2
Get the HDMI digital audio
status of all outputs.
%9977.
Out
01 02 03 04
Audio
Y
Y
Y
Y
EDID Management Commands
Function
Command
Example Feedback
Report the EDID® data from
output [x], where [x]=1~4.
EDIDG[x].
Output 04 EDID Data:
00 FF FF FF FF FF FF 00
...
Reset the EDID data for all
inputs to the factory default
setting.
EDIDMInit.
EDIDMInit.
Set the EDID data for input [y]
to [x], where [y]=1~5, with 1~4
representing inputs 1~4 and 5
representing all inputs, and
[x]=1~13 representing the EDID
preset from the table in the
EDID PRESETS section below.
EDIDM[x]B[y].
EDIDM1B4
Upgrade the user-defined
EDID, where [x]=1 (always).
When the command is
applied, the system prompts
you to upload the EDID .bin
file. The operation will be
cancelled if no file is uploaded
after 10 seconds.
EDIDUpgrade[x].
Please send the EDID file
within 10 seconds!
