12
RS-232 COMMANDS
Notes:
•
All commands are case sensitive and must include any punctuation
marks shown.
•
All commands must end with <CR><LF>.
•
In the commands below, do not type the [ and ] symbols. They are used
to make the commands easier to read and to clearly delineate between
the command and the parameters.
System Commands
Function
Command
Example Feedback
Get the system name.
/*Type;
43961
Lock the front panel buttons.
/%Lock;
System Locked!
Unlock the front panel
buttons.
/%Unlock;
System UnLock!
Get the software version.
/^Version;
V1.0.0
Cancel the current operation
and return to the previous
switching status.
Undo.
Undo Ok!
Power the system on.
PWON.
PWON
Put the system into standby
mode.
STANDBY.
STANDBY
Get the system locking status. %9961.
System Locked!
Get the system power status.
%9962.
PWON
Reset to factory default
settings.
%0911.
Factory Default
