7
Rear Panel
1.
INPUTS: Four HDMI® ports for connecting HDMI video source devices.
2.
OUTPUTS: Four HDMI ports for connecting HDMI display devices.
3.
RS232: 3-pin connector for connecting the included RS-232 cable to
connect to a computer for RS-232 control.
4.
IR EYE: 3.5mm jack for connecting the included IR receiver to receive
signals from the included IR remote control.
5.
DC 12V: DC barrel connector for connecting the included AC power
adapter.
Remote Control
1.
POWER: Press the button to turn the system
on or to put it into standby mode.
2.
INPUTS: Four numbered buttons
corresponding to the four inputs.
3.
OUTPUTS: Four numbered buttons
corresponding to the four outputs.
4.
ENTER: Press the button to execute a desired
change command.
5.
ALL: Press the button to select all inputs or
all outputs in a change command.
6.
EDID: Press the button to initiate an EDID®
change command.
