8
7.
CLEAR: Press the button at any time before pressing the ENTER button
cancel a change command in progress.
Following are examples of how to use the remote control issue change
commands.
•
To send input 3 to output 2, first press the INPUTS 3 button, then press
the OUTPUTS 2 button, and finally press the ENTER button to execute
the change command.
•
To send input 1 to outputs 3 and 4, first press the INPUTS 1 button, then
press the OUTPUTS 3 and OUTPUTS 4 buttons, and finally press the
ENTER button to execute the change command.
•
To send input 2 to all outputs, first press the INPUTS 2 button, then press
the ALL button, and finally press the ENTER button to execute the
change command.
•
To send the EDID® from the display connected to output 1 to the source
device connected to input 4, first press the EDID button, then press the
INPUTS 4 button, then press the OUTPUTS 1 button, and finally press the
ENTER button to execute the change command.
•
To send the EDID from the display connected to output 3 to inputs 1 and
3, first press the EDID button, the press the INPUTS 1 and INPUTS 3
buttons, then press the OUTPUTS 3 button, and finally press the ENTER
button to execute the change command.
•
To send the EDID from the display connected to output 2 to all inputs,
first press the EDID button, then press the ALL button, then press the
OUTPUTS 2 button, and finally press the ENTER button to execute the
change command.
•
At any time prior to pressing the ENTER button in the above examples,
press the CLEAR button to cancel the change command.
