BLACKBERRY RADAR R2 ITE100-1 INSTALLATION GUIDE
DRY VAN, INSULATED TRAILERS (BARN DOORS)—CARGO PERCENTAGE
8
3.3 Matching a module identifier to an asset identifier
In order to track an asset, the BlackBerry Radar R2 module that is installed on the asset must be
associated with the asset in the BlackBerry Radar Dashboard. It is, therefore, very important to
keep a clear record of which BlackBerry Radar R2 module is installed on which asset.
The Dashboard application tracks modules and assets using ‘identifiers’. The asset identifier is
the name or number of the asset you wish to track. The asset identifiers are entered into the
application when you add the assets and will be listed on your installation worksheet. The
identifier for each Radar R2 module is printed on three labels—two labels attached to the front
surface of the outer housing and the other label inside the battery compartment. The module
identifier also serves as the serial number (S/N) for the module.
To match a module identifier with an asset identifier:
1.
Locate the module identifier for your device. The module identifier is shown in two
places.
1.
Externally—temporary S/N label and permanent exterior S/N label, attached to
the front of the outer housing,
2.
Internally—permanent main product label, in the battery compartment.
