BLACKBERRY RADAR R2 ITE100-1 INSTALLATION GUIDE
DRY VAN, INSULATED TRAILERS (BARN DOORS)—CARGO PERCENTAGE
11
3.4.1 Prepare module for installation—Battery connection
1.
Remove the module from the package and from the plastic bag.
2.
Remove the battery door from the rear of the device. Remove the fastener bag from the
device and keep nearby. You will require these screws to secure the battery door to the
outer housing and complete the module assembly process.
Tip:
If you find it difficult to remove the battery door from the outer housing, you may
insert a tool--such as a screwdriver--near the arrows embossed into the door and lift to
separate the door from the housing.
IMPORTANT:
Please do not perform the battery connection process until you are
ready to install and associate the BlackBerry Radar modules on your asset. Once
the battery is connected, please complete the module installation and association,
as soon as you can, to conserve battery life.
Arrow
Arrow
Fastener
Bag
