TWISTER
.
Instruction Manual
8
3.
Mix a generous amount of 30 minute
epoxy. Coat the exposed half of the dihedral
brace, and the remaining wing joiner box and
both root ribs with epoxy. Slide the two wing
halves together and carefully align them at
the leading and trailing edges. Wipe away any
excess epoxy using paper towels. Use mask
ing tape wrapped around the center section
to hold the halves in place until the epoxy
cures.
INTALLING THE ENGINE MOUTH
Bottom side
Top side
Masking tape.
Apply masking tape.
Masking tape.
Apply epoxy to
these areas.
3 x 25mm.
3 x 20mm.
