TWISTER
.
Instruction Manual
6
INSTALLING THE AILERON LINKAGES
1. Working with the aileron linkage for
now, thread one nylon clevis onto one of the
threaded wires.
2. Attach the clevis to the outer hole in the
control horn. Install a silicone tube on the
clevis.
3. Plug the aileron servo into the receiver
and center the servo. Install the servo arm onto
the servo. The servo arm should be
perpendicular to the servo and point toward
the middle of the wing.
Bottom side
Top side
3) Install control horn as same as picture
below.
Control horn
Remove
covering
C/A glue
