12
EDGE -
Item code: BH69-A
.
Instruction Manual
Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
Secure.
Throttle servo
INSTALLING THE SPINNER.
INSTALLING THE THROTTLE PUSHROD.
Secure.
M a c h i n e
screw.
Left side.
Throttle servo
Secure.
Right side.
3x15mm
