10
EDGE -
Item code: BH69-A
.
Instruction Manual
Drill a hole 4mm
diameter
Secure
Mark point
Left side
Right side
Pushrod wire.
Pushrod
wire.
Locate the long piece of wire used for the
throttle pushrod. One end of the wire has been
pre-bend in to a “Z” bend at the factory . This
“Z” bend should be inserted into the throttle
arm of the engine when the engine is fitted onto
the engine mount. Fit the engine to the engine
mount using the screws provided.
INSTALLING THE ENGINE.
4 x 30mm
125mm
