CANTER.
Instruction Manual
18
Rudder pushrod install as same as the way
of aileron pushrod.
NOSE GEAR PUSHROD INSTALLING .
Rudder
control horn.
RUDDER PUSHROD INSTALLATION.
Elevator
pushrod.
Elevator
pushrod.
Rudder
pushrod.
Rudder pushrod.
1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess material
from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
INSTALLING THE THROTTLE PUSHROD.
Servo arm.
Connector.
Elevator pushrod
Rudder pushrod
Snap keeper
Nose gear pushrod
Throttle pushrod
