![background image](http://html1.mh-extra.com/html/black-decker-1/smartselect-bdph1200/smartselect-bdph1200_instruction-manual_2765921035.webp)
TROUBLESHOOTING
TROUBLE! MATERIAL RUNS OR DRIPS.
WHAT’S WRONG?
WHAT TO DO…
Spraying too much material.
Reduce air flow by turning material adjustment knob.
Spraying too slowly.
Increase speed of application.
Spraying too close.
Increase distance from surface.
Viscosity too thin.
Check dilution recommendation.
TROUBLE! MATERIAL DRIPS FROM NOZZLE
WHAT’S WRONG?
WHAT TO DO…
Nozzle loose.
Screw nozzle tight
Nozzle breaks.
Change
Y-type seal ring of nozzle breaks.
Change
Material accumulated /clog inside nozzle.
Clean
TROUBLE! TOO MUCH OVER SPRAY.
WHAT’S WRONG?
WHAT TO DO…
Sprayer too far from surface.
Reduce distance to surface.
Too much material being sprayed.
Reduce air flow by turning material adjustment knob.
TROUBLE! LITTLE OR NO MATERIAL BEING RELEASED.
WHAT’S WRONG?
WHAT TO DO…
Spray nozzle/tip clogged.
Clean nozzles.
Y-type seal ring of nozzle missing
Add seal ring to nozzle and assemble in place
Pickup tube loose or clogged.
Check tube.
Canister loose
Screw canister tightly in place
Quick refill lid loose
Screw canister tightly in place
Air hose split or disconnected
Check air hose
Flow control knob setting too low.
Increase flow control setting.
Air inlet blocked.
Clean or change air filter.
Material too thick.
Check viscosity recommendation
TROUBLE! MATERIAL BEING SPRAYED IS SPLATTERING.
WHAT’S WRONG?
WHAT TO DO…
Viscosity of material is too high.
Thin material per manufacturer recommendation.
TROUBLE! ATOMIZATION IS TOO COARSE
WHAT’S WRONG?
WHAT TO DO…
Viscosity of material too high.
Thin material per manufacturer recommendation.
Flow control knob setting too high.
Decrease flow control setting.
Material accumulated /clog inside nozzle.
Clean
Air inlet blocked.
Clean or change air filter
Canister loose.
Screw canister tightly in place
Quick refill lid loose.
Screw quick refill lid tight in place
Summary of Contents for SmartSelect BDPH1200
