![background image](http://html1.mh-extra.com/html/black-decker-1/bd22mwsa/bd22mwsa_instruction-manual_2765652010.webp)
Page 10
SET UP & USE
OTHER FEATURES
Bucket Full Light
When the water collection bucket is
full, the unit will shut off automatically,
make a beeping noise and the
BUCKET FULL indicator will light. The
dehumidifier will not run again until the
bucket is emptied and properly placed
back inside the unit.
Auto Defrost
When frost builds up on the
evaporator coils, the compressor will
cycle off and the fan will continue to
run until the frost disappears.
Auto Shut Off
The dehumidifier shuts off when the
bucket is full, or when the bucket is
removed or not replaced in the proper
position. The fan motor will continue
to run for 30 seconds.
Wait 3 minutes before resuming
operation. This is to protect the unit.
Operation will automatically start after
3 minutes.
Auto-Restart
If the unit turns off unexpectedly
due to a power outage, it will restart
with the previous function setting
automatically when the power
resumes.
Setting the Timer
To program the unit to automatically
turn ON, press the TIMER button
when the unit is OFF. Press the < or
> to increase the timer in 30 minute
increments up to 10 hours, After 10
hours, each increase will run in 1 hour
increments up to 24 hours. Once the
desired time is reached, the unit will
automatically turn ON.
To program the unit to automatically
turn OFF, press the TIMER button
when the unit is ON. Each press of the
< or > buttons will change the timer
setting in 30 minute increments up to
10 hours. After 10 hours, each press
will increase or decrease the timer in 1
hour increments up to 24 hours. Once
the desired time is over, the unit will
automatically power OFF.
When the Auto Start & Auto Stop
times are set, within the same program
sequence, Timer On Off indicator lights
illuminate identifying both On and Off
times are now programmed.
Turning the unit On or Off at any
time or adjusting the timer setting to
0.0 will cancel the Auto Start/Stop
function.
When LED display window displays
the code of P2, the Auto Start/Stop
function will also be cancelled.
Summary of Contents for BD22MWSA
