724-746-5500 | blackbox.com
Page 43
Chapter 6: Operation
Figure 6-38. UTP pairs and length are displayed.
Select MAP + TRACE for wiremap and tones.
Remote Probe LEDs. The Remote Probe needs to be connected
only for a brief period. Flashing LED(s) indicate the test is pro-
gressing. A steady LED indicates the test is completed. This saves
you an extra trip to retrieve the probe. If LED(s) continue to flash
the cable, the cable has a wiring problem. Disconnect the probe
and go to the Main Unit to see the results.
Figure 6-39. LEDs on the remote probe.
