SERVSWITCH
™
BRAND CATX KVM EXTENDER FAMILY
38
Local Console Commands
After pressing the initial ‘hot’ key sequence on the local keyboard, you can issue a number of
commands by pressing additional keys. These commands allow you to control a Private mode
session on the local console, reset the keyboard and mouse or restore the local Unit’s factory
default settings.
Command Key
Sequence
Toggle Local Unit Private Mode
<Scroll Lock>
ACU2209A, ACU2228A only
Use this command to begin or end a Private Mode session at the local console (see page 35).
Toggle Remote Video Blanking State
<Left Control> + <Scroll Lock>
ACU2209A, ACU2228A only
Use this command to determine whether the remote console monitor will be blanked (default
setting) or enabled during a Private mode session at the local console (see page 35).
Reset Local Keyboard and Mouse
<F1>
Resets the local console’s keyboard and mouse. You may need to do this if you have hot-
plugged a keyboard or mouse and it has not initialized correctly.
Mouse Recovery
<F3>
Use this command if you experience erratic movement of the mouse pointer or you have lost
mouse movement after hot plugging the Local Unit into the CPU. In the case of erratic mouse
movement, you may need to enter the command a number of times to re-synchronize the
mouse signal. Alternatively, stop moving the mouse for a few seconds and the operating
system’s mouse drivers may automatically re-synchronize the signal. If the Local Unit has
been hot-plugged, this command will issue a request to the OS to initialize the mouse.
Use
this command with care.
Exit Command Mode and Save
<Esc>
Exit Command Mode and save all settings to EEPROM.
Set Local Unit to Default State
<Left Control> + <F9>
Restore Local Unit factory defaults (configuration and DDC).
Summary of Contents for ServSwitch ACU2 01A-R2
Page 1: ...ACU2 01A ACU2222A R2 ACU2209A ACU2228A 2 R2 November 2009 ...
Page 2: ......
Page 60: ...NOTES ...
Page 61: ......
