SERVSWITCH
™
BRAND CATX KVM EXTENDER FAMILY
30
3.
Select the video channel you want to configure using one of the following keys (
not
on
the numeric keypad):
Channel Command
Key
Select Channel 1 For Adjustment
<1>
Select Channel 2 For Adjustment
<2>
Select BOTH Video Channels
<0>
(Channel 0)
Use Channel 0 to tune both video channels simultaneously. This
simplifies the procedure for setting up dual-head installations where a
consistent cable type is used and the adjustments required should be
almost the same.
4.
Reset the selected channel(s) by pressing:
<Left Control> + <Home>
5.
Step through the
Assisted EQ
settings to find the level that gives the best image.
Assisted EQ Command Key
Sequence
Next Assisted EQ Setting
<Left Control> + <Page Up>
Previous Assisted EQ Setting
<Left Control> + <Page Down>
Assisted EQ steps through a table of preset LF & HF EQ values for
different lengths of cable (in 80ft {25m} increments calibrated from 0 to
1250ft {375m}). Each time you enter Command Mode and start adjusting
Assisted EQ, the unit resets LF and HF values.
After finding the best setting, you will probably want to fine-tune the LF and
HF equalization settings (see steps 8&9). This is best done after adjusting for
any color skew as described below.
Summary of Contents for ServSwitch ACU2 01A-R2
Page 1: ...ACU2 01A ACU2222A R2 ACU2209A ACU2228A 2 R2 November 2009 ...
Page 2: ......
Page 60: ...NOTES ...
Page 61: ......
