REMOTE UNIT CONFIGURATION & OPERATION
31
LF too low
LF too high
HF too low
HF too high
Figure 7
Problems with smearing and sharpness requiring LF and
HF adjustment
6.
Identify the ‘slowest’ color – the colored line furthest to the right. Delay the signals of
the two other colors using the following commands:
Delay Command
Key Sequence
Increase RED Delay (move right)
Decrease RED Delay (move left)
<R> + <Right Arrow>
<R> + <Left Arrow>
Increase GREEN Delay (move right)
Decrease GREEN Delay (move left)
<G> + <Right Arrow>
<G> + <Left Arrow>
Increase BLUE Delay (move right)
Decrease BLUE Delay (move left)
<B> + <Right Arrow>
<B> + <Left Arrow>
Use the
Quick Skew
feature to determine which color requires delaying or to quickly set
the delay on a color back to zero. Applying
Quick Skew
to a color toggles its delay
between zero and 19nS (a typically required value).
Quick Skew Command Key
Sequence
Toggle RED Delay
<Left Control> + <R>
Toggle GREEN Delay
<Left Control> + <G>
Toggle BLUE Delay
<Left Control> + <B>
Summary of Contents for ServSwitch ACU2 01A-R2
Page 1: ...ACU2 01A ACU2222A R2 ACU2209A ACU2228A 2 R2 November 2009 ...
Page 2: ......
Page 60: ...NOTES ...
Page 61: ......
