48
SERVSWITCH™ ULTRA REMOTE
10. Configuration Settings
The commands in the Settings menu of the ServSwitch™ Ultra Remote’s Viewer
program bring up a tabbed dialog box that you can use to configure both the Ultra
Remote and the Ultra Remote Viewer. You can configure the Viewer with the
“Connections” and “Keyboard and Mouse” tabs; these configuration settings are
stored on your computer. If you are an administrator, you may also configure the
Ultra Remote using the “KVM Switch” and “Security” tabs; these settings are stored
on the Ultra Remote.
These buttons appear at the bottom of the tabbed dialog box and, if selected,
remove the Settings dialog box from view:
OK:
This button applies changes made in all tabs except the Security tab to the
Viewer immediately. If an administrator changes items in the Security tabs, the
changes are saved on the Ultra Remote and the changes become effective at the
next login.
The Viewer disables the OK button (grays it out) if another configuration dialog
box, such as the User Details dialog box of the Security tab, is open. Close the
other dialog box to re-enable the OK button.
Cancel:
This button discards changes you make in all tabs.
10.1 Connections
The Connections tab, shown in Figure 10-1 on the next page, displays and
maintains a list of Ultra Remote locations to which the Viewer may connect. A
location is a name you assign to a given Ultra Remote.
Ultra Remote Locations:
Three items describe each Ultra Remote location in the
list: location name, connection type, and address. When you select a location in the
list, the Viewer displays corresponding parameters in the Connect Using and IP
Address fields. You may add, rename, or remove a location using the Add
Location, Edit Location, and Delete Location buttons respectively. Changes made
here in the Connections tab are immediately reflected in the Connect menu and
in the remote-computer selection list on the toolbar.
The Add, Edit, and Delete Location buttons bring up another dialog box that
displays the location currently selected in the toolbar’s remote-computer selection
listbox. That location may not be edited or deleted if the Viewer is connected to it.
The location selected in the Locations list when you close the dialog box is also
automatically selected in the toolbar’s remote-computer selection listbox.
Summary of Contents for ServSwitch ACR9000A
Page 73: ...72 SERVSWITCH ULTRA REMOTE Figure 13 3 Key codes are editable for custom switches...
Page 78: ...NOTES...
Page 79: ...NOTES...
