28
SERVSWITCH™ ULTRA REMOTE
6.2 About Logins
A default administrator account exists for initial configuration when the Ultra
Remote first starts up. The user ID is “admin” (not case sensitive) and there is no
password.
CAUTION!
One of the first steps an administrator should perform is to secure the
user ID and password for the default administrator account. Change
them with the Ultra Remote Viewer using the default account and the
Settings:Security tab (see
Section 10.2.4
). If you forget the administrator
user ID or password, override the user ID and password check as
described in
Section 6.7
.
There are two types of logins:
•
Connect login:
Connects the local user station to the attached KVM switch or
CPU.
•
Configure login:
Authorizes the user to configure the Ultra Remote’s IP
address.
Press the [F9] key to display the connect-login screen or the [F10] key to display
the configure-login screen. Each screen is a different color. You must use the
administrator user ID for the configure login.
You may press the [F1] key to view help text on a login screen. Press [F1] again
to remove the help text from the screen.
Summary of Contents for ServSwitch ACR9000A
Page 73: ...72 SERVSWITCH ULTRA REMOTE Figure 13 3 Key codes are editable for custom switches...
Page 78: ...NOTES...
Page 79: ...NOTES...
