34
HPIIISi TWINAX CARD
Command:
98, Restore Defaults or Print Configuration
Description:
Either restores the factory-default configuration settings, prints out a copy of
the active configuration settings, or loads the configuration settings stored in
permanent nonvolatile memory as the new active configuration.
If you print a document using temporary configuration settings established
with host/PC-download commands (that is, settings that haven’t been stored
with the “Z99,0” command), “Z98,2” will restore the saved settings from
permanent memory.
Note that after you send the “Z98,2” or “Z99,0” command, the active
configuration and the stored configuration will be identical.
NOTE
Even restoring factory defaults has no effect on the Card’s twinax
address (host/PC-download command 00) or the host language
(command 05).
Possible
Results:
Arguments:
0
Restores the factory-default configuration as the current
active configuration
1
Prints out the active configuration settings
2
Restores the configuration settings stored in NVRAM to
active status
Examples:
“&%Z98,0” reloads the factory-default settings as the active configuration;
“&%Z98,1” prints out the active configuration settings for review; when
placed at the end of a document, “&%Z98,2” restores the standard
configuration settings for the next user of the printer.
