25
CHAPTER 5: Configuration
Command:
10, Line Spacing
Description:
Use this command to select compressed LPI (lines per inch), true LPI, or a
type of line-space handling that is compatible with the Xpoint Twinax
Controller. If you are using one of the popular electronic-forms packages
from companies such as Xpoint, Eclipse, Formula One, etc., select true LPI;
however, if you want to run the software setup for the Xpoint Twinax
Controller, select option 2.
Possible
Results:
Arguments:
0
Compressed LPI
1
True LPI
2
Xpoint Twinax Controller compatibility
Example:
“&Z10,1” selects true LPI.
Command:
11, Host-Port Initialization String
Description:
Creates a twinax-port initialization string that the Card will send to the printer
after the Card has reconfigured it for host printing. Place up to 25 pairs of
hex codes, corresponding to your desired printer commands, inside a pair
of parentheses following a “0” (zero). (To aid readability, a single space is
allowed between hex bytes.) The string will be stored in the Card’s memory
and will be activated after top-of-page processing on each page.
For a list of available printer commands and their hex values, consult your
printer’s manual.
Possible Arguments:
Results:
0([hex codes])
Defines a host-port initialization string consisting
of the specified hex codes.
0()
Deletes the specified string from memory.
Example:
“&%Z11,0(1B266C3844)” sets line spacing to 8 LPI on an HP LaserJet 4si
printer during each host-printing initialization.
